Visioneer Knowledgebase
Visioneer Knowledgebase
Title: Turn Off the Lamp Warm Up or Power Save Settings
Article ID: VIS1266
Updated: 9/21/2006
Operating Systems: Windows XP / 2000 / Me / 98
Scanner Models: Visioneer Flatbed: 9520, 9420, 7400, 9320, 9220, 9120, 9020, 9000, 8900, 8800, 8700, 8600, 8100, 7700, 7600, 7300, 7100, 6600, 6400, 7600, 6200, 6100, 6000, 5800, 5600, 5300, 4800, 4500, 4400, 3300, 3100, 3000, PaperPort OneTouch
  Visioneer SheetFed: XP300, XP220, XP200, XP100, RoadWarrior (RW120, PRW120), StrobePro, PaperPort Strobe, PaperPort IX, VX, MX
  Visioneer ADF: XP470, XP450, 9750, 9650, 9650i, 9450, 8650, PT430, PT470, PT680, PT780
  Xerox : X6400, X7600, X4800, X2400DM250, DM250L, DM252, DM262, DM262i, DM272, DM150, DM152, DM162, DM510, DM515, DM520, DM632, DM3640, DM752
 
Symptom:
 
You want to turn off lamp warm up on your scanner.
 
Solution:
 
ADF units do not have the option to turn off the lamp warm up.

For other models, click VIS1100 - Configuring OneTouch 3.0 Scan Buttons for instructions on shutting off lamp warm up.
 
ADF units do not have the option to turn off the lamp warm up. For ADF models with a OneTouch 4.0 driver you can change the lamp power off mode from 10 minutes to 10 hours, preventing the scanner from going into power save mode and preventing the wake-up period. Please be aware that adjusting this setting for longer delay periods will shorten the life of the scanner lamp as the lamp will be on for the period selected.
 
If you are unsure of whether you have a OneTouch 3.0 or OneTouch 4.0 driver:
  1. Click here then click on "Run" to run a utility that will tell you which version of the scanner driver you have installed.
    or
  2. Open the Windows Control Panel then open "Add/Remove Programs". If "OneTouch 4.0" is in the program list then you have that driver installed.
    Click VIS1186 - Change Power Save Settings for instructions on how to change this setting.
 
If you do not have OneTouch 4.0 then there is no way for you to change the lamp delay.

 

Visioneer Disclaimer


Visioneer provides these technical articles for information use only. The information is generally for a specific scanner model distributed by Visioneer and a designated version of software provided with the scanner. Visioneer makes reasonable efforts to verify the accuracy of content and issue resolution in these technical articles but cannot guarantee any matter including accuracy or results. The articles are provided "as is", without representation or warranty, express or implied, whether of merchantability, fitness for particular purpose, title, or non-infringement. Visioneer disclaims any liability for damages, whether direct or indirect, special, incidental, or consequential, from use of the information in these articles. Visioneer does not evaluate any effect on software and hardware not provided by Visioneer, and therefore disclaims any liability for same. Visioneer is not responsible for the content of support pages accessed through external links. The articles are subject to revision or change without notice.