Visioneer Knowledgebase
Visioneer Knowledgebase
Title: The current configuration is Locked
Article ID: VIS1410
Updated: 7/2/2007
Operating Systems: Windows 7 / Vista / XP / 2000
Scanner Models: Visioneer Flatbed: 9520, 9420, 7400, 9320, 9220, 9120, 9020, 9000, 8900, 8800, 8700, 8600, 8100, 7700, 7600, 7300, 7100, 6600, 6400, 7600, 6200, 6100, 6000, 5800, 5600, 5300, 4800, 4500, 4400, 3300, 3100, 3000, PaperPort OneTouch
  Visioneer SheetFed: XP300, XP220, XP200, XP100, RoadWarrior (RW120, PRW120), StrobePro, PaperPort Strobe, PaperPort IX, VX, MX
  Visioneer ADF: XP470, XP450, 9750, 9650, 9650i, 9450, 8650, PT430, PT470, PT680, PT780
  Xerox : X6400, X7600, X4800, X2400DM250, DM250L, DM252, DM262, DM262i, DM272, DM150, DM152, DM162, DM510, DM515, DM520, DM632, DM3640, DM752
 
Symptom:
 
You receive an error message in OneTouch 4.0 "The current configuration is Locked. To apply your modifications, you have to unlock it. Would you unlock and retry your modifications?".

 
Solution:
 
To unlock the configuration:
  1. If the error message is still open, click "Retry"
  2. Click on the "Scan Settings" tab
  3. Click on the 'Lock' picture to the far right of the configuration's name



  4. The 'Lock' will change to a 'Key' to indicate the configuration is now unlocked



  5. Click "OK" to save the configuration

 

Visioneer Disclaimer


Visioneer provides these technical articles for information use only. The information is generally for a specific scanner model distributed by Visioneer and a designated version of software provided with the scanner. Visioneer makes reasonable efforts to verify the accuracy of content and issue resolution in these technical articles but cannot guarantee any matter including accuracy or results. The articles are provided "as is", without representation or warranty, express or implied, whether of merchantability, fitness for particular purpose, title, or non-infringement. Visioneer disclaims any liability for damages, whether direct or indirect, special, incidental, or consequential, from use of the information in these articles. Visioneer does not evaluate any effect on software and hardware not provided by Visioneer, and therefore disclaims any liability for same. Visioneer is not responsible for the content of support pages accessed through external links. The articles are subject to revision or change without notice.