Visioneer Knowledgebase
Visioneer Knowledgebase
Title: Complete QuickScan Removal
Article ID: VIS1170
Updated: 3/18/2005
Operating Systems: Windows XP / 2000 / Me / 98
Scanner Models: Visioneer Flatbed: 9520, 9420, 7400
  Visioneer Strobe: XP300, XP220, XP200, XP100, RoadWarrior (RW120, PRW120)
  Visioneer ADF: PT480, XP470, XP450, PT430, S500 , PT680, PT780, 9750, 9650, 9450
  Xerox Flatbed: X6400, X7600, X4800, X2400
  Xerox SheetFed: TS100, CS200
  Xerox ADF: DM250, DM250L, DM252, DM262, DM262i, DM272, DM150, DM152, DM162, DM510, DM515, DM520, DM632, DM3640, DM752
How do I completely Remove QuickScan?
  1. Remove QuickScan from Add/Remove Programs.
    Go to "Start" then "Settings" then "Control Panel" then "Add/Remove Programs".

  2. Remove C:\Program Files\Pixel Translations

  3. Remove C:\Winnt\PixTran (for Windows XP: C:\Windows\PixTran)
  4. Empty your Recycle Bin

  5. Restart your computer

  6. After PC restarts, insert the Scanner Installation disk into your computer and reinstall only QuickScan
  7. Once QuickScan is installed go to "Start" then "Run" and type "D:\QSP\Quickscan\Drivers"

  8. Click "OK"
  9. Once the folder opens, open the "ADDSCAN.EXE" file
  10. hoose your Scanner.

  11. Click "OK"
  12. It will give you a message saying QuickScan has been installed successfully.

    You might get a message that the ASPI layer has been installed and you need to restart your PC. Go ahead and do so at this point

  13. Open QuickScan
  14. Click on "Scan"

  15. Then click on "Select Scanner"
  16. After Selecting Scanner, select the your scanner.
  17. Click "OK"
  18. Your QuickScan is now installed successfully and you will be able to scan.


Visioneer Disclaimer

Visioneer provides these technical articles for information use only. The information is generally for a specific scanner model distributed by Visioneer and a designated version of software provided with the scanner. Visioneer makes reasonable efforts to verify the accuracy of content and issue resolution in these technical articles but cannot guarantee any matter including accuracy or results. The articles are provided "as is", without representation or warranty, express or implied, whether of merchantability, fitness for particular purpose, title, or non-infringement. Visioneer disclaims any liability for damages, whether direct or indirect, special, incidental, or consequential, from use of the information in these articles. Visioneer does not evaluate any effect on software and hardware not provided by Visioneer, and therefore disclaims any liability for same. Visioneer is not responsible for the content of support pages accessed through external links. The articles are subject to revision or change without notice.